Table of Contents

NTP

Serveur (contrôleur de domaine)

Script NTP-root-config.bat : 

w32tm /Config /SyncFromFlags:Manual /ManualPeerList:"1.0.8.25,0x1 1.0.8.26,0x1" /Reliable:Yes /Update

REG ADD "HKLM\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient" /v "SpecialPollInterval" /t REG_DWORD /d 0x00000e10 /f

REG ADD "HKLM\SYSTEM\CurrentControlSet\services\W32Time\Config" /v "AnnounceFlags" /t REG_DWORD /d 0x5 /f

net stop w32time && net start w32time

w32tm /resync

w32tm /resync

pause

Client (membre domaine)

Script NTP-client-config.bat : 

w32tm /Config /SyncFromFlags:Manual /ManualPeerList:"1.0.8.25,0x1 1.0.8.26,0x1" /Reliable:Yes /Update

REG ADD "HKLM\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient" /v "SpecialPollInterval" /t REG_DWORD /d 0x00000e10 /f

REG ADD "HKLM\SYSTEM\CurrentControlSet\services\W32Time\Config" /v "AnnounceFlags" /t REG_DWORD /d 0xa /f

REG ADD "HKLM\System\CurrentControlSet\Services\W32Time\Parameters" /v "Type" /t REG_SZ /d NT5DS /f

net stop w32time && net start w32time

w32tm /resync

w32tm /resync

pause

FIXME Ce qui diffère c'est le AnnounceFlags qui a la valeur 0xa, et il y a la ligne suivante en + par rapport au serveur :
REG ADD “HKLM\System\CurrentControlSet\Services\W32Time\Parameters” /v “Type” /t REG_SZ /d NT5DS /f

Vérification

Script NTP-check.bat : 

w32tm /query /status

w32tm /query /source

w32tm /query /peers

pause
, , , , , ,